Name: K&N Aircharger Aircharger System, 2005-2006 Pontiac GTO
Brand: MailOrder Tuner
Price: 349.99 USD
Availability: InStock

AirAid 862-042 Corvette Dry Filter - Black Oil-Free

$229.99

The AIRAID 862-042 fits some Chevrolet Corvette, and Chevrolet Corvette Z06 models. See vehicle applications for details.

This AIRAID Direct-Fit Replacement Filter is a drop-in replacement for your vehicle’s stock paper air filter that is designed to improve horsepower and acceleration. The air filter is constructed with multiple layers of filter media and provides significant improvements in air flow and filtration compared to typical replacement filters with the added benefit of being washable and reusable. Why throw money away on a paper filter each time the old one gets dirty when you can upgrade to a serviceable AIRAID Direct-Fit Replacement Filter for often less than the cost of two stock replacements? Installation takes only minutes and is as simple as replacing your stock filter.

[More Information on AIRAID Direct-Fit Replacement Filters]

Stock replacement filter for better performance
Great filtration with low restriction
Washable and reusable
Simply takes only a few minutes to install

Available Information

Installation Instruction Sheet

AirAid 862-042 Corvette Dry Filter - Black Oil-Free - MailOrder Tuner

FAST Big Mouth 102mm Throttle Body w/TPS Sensor

$319.99

When it comes to improving your engine’s performance, increased airflow is a key ingredient. The FAST™ Big Mouth Throttle Bodies™ for the FAST™ LSX™ 92mm & LSXR™ 102mm Intake Manifolds increase airflow through a series of innovative design changes and a slightly enlarged throttle opening. FAST™ also invested significant testing & engineering resources into optimizing cross-sectional flow and eliminating airflow turbulence, especially at part throttle operation.

In addition, these throttle bodies offer increased throttle blade thickness to eliminate deflection commonly found with other throttle bodies, especially those in boosted applications. A smoother operating offset blade pivot improves throttle response, and a beefed up linkage and dual throttle spring mechanism ensure total throttle control. The FAST™ Big Mouth 92mm Throttle Body™ will deliver bolton GM Gen III (LS1, -2 & -6) horsepower while the LSXR™ is designed to maximize potential performance upgrades on L92/LS3/LS7 engines.

FAST Big Mouth 102mm Throttle Body w/TPS Sensor - MailOrder Tuner

FAST LSx 92mm Intake Manifold, Black

$1,128.95

The FAST 92mm intake manifold is back, IN BLACK!!

Forget about inferior knock-offs, the patented LSX™ 92mm Intake Manifold from FAST™ is the only three-piece Gen III composite manifold proven to deliver increased performance without compromising bottom-end drivability or high rpm power. For both street and racing applications, the intake manifold is an easy bolt-on installation for GM Gen III (LS1, -2 & -6) engines and is designed to work with the new FAST™ Big Mouth Throttle Body™.

The new FAST™ LSX™ 92mm Intake Manifold maintains the performance gains achieved over stock intake manifolds with no loss in drivability or low rpm torque. While the new FAST™ intake manifold delivers terrific performance right out of the box, it can be ported by the customer for even more flow. As requested by previous LSX™ customers, the new intake features the added benefits of corrosion-free stainless steel assembly bolts, an improved throttle body sealing flange and o-ring gasket and threaded insert throttle body mounts that provide increased durability.

FAST LSx 92mm Intake Manifold, Black - MailOrder Tuner

MSD 2702 Red Lettering Atomic LS Cathedral Port Intake Manifold for LS1/LS2/LS6

$1,199.95

The MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails* including MSD's Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package. *Note: Use of aftermarket rails may require the use of customer-supplied spacers and hardware.

FEATURES:

CARB Approved, 50 State Legal EO# D-722-3!
The two-piece manifold design provide convenient access to the runners for porting.
Allows for the use of stock fuel rails, aftermarket rails including the Atomic LS EFI.
Designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient air flow paths.
Direct flow path runner design promotes maximum airflow.
103mm Throttle bore allows the use of large throttle bodies for greater air flow.
Polymer material resists heat soak and minimizes weight.

TECH RESOURCES

Instructions for Part# 2702

Note: Will interfere with stock LS1/LS6 water pump. Requires modification to top water pump bolt or use of LS2 water pump. See page 8 of the instructions.

MSD 2702 Red Lettering Atomic LS Cathedral Port Intake Manifold for LS1/LS2/LS6 - MailOrder Tuner

Holley 820101 Silver Low Profile Sniper EFI Sheet Metal Fabricated Intake Manifold, LS1/2/6 w/ 92mm TB Opening & Fuel Rail Kit

$749.95

Hi-Ram Sheet Metal Fabricated Intake Manifold LS1/LS2/LS6 92mm Throttle Body opening + Fuel Rail Kit Silver with Sniper logo -Low Profile
*This product is for silver finish and not black finish; black finish shown for illustration purposes only

*** This intake is designed to work with stock LS heads. The use of some aftermarket cylinder heads may result in port misalignment ***

Holley Sniper Fabricated Manifolds continues to push the aftermarket by introducing Low Profile intakes for GM LS Engines. These Intakes are a good looking, perform well, and offer an extremely good value for a performance sheet metal style intake manifold for the very popular GM LS engine family. Each manifold is ready to bolt on out of the box and are designed to accept our Sniper high-flow throttle bodies and include high flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured and welded for a perfect fit and maximum structural integrity. Choice of Throttle Body opening sizes of 92mm & 102mm are available

FEATURES:

Low Profile Design (overall 1.875” shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum
Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner.
3mm (1/8") thick T6061 Sheet Aluminum construction, strong and durable even under high horsepower and boosted conditions
Available in 92mm and 102mm bore Throttle Body Openings
100% TIG welded
Intakes include 3/8" Fuel rail kits with -8AN fittings and crossover braided line capable of supporting 750+ horsepower (laser engraved Sniper logo)
Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders

Brand	Holley Sniper EFI
Construction	Fabricated
Emission Code	3
Engine	GM LS1/LS2/LS6
Finish	Bead Blast Silver Anodized
Front Height	7.000 inch
Product Type	Intake Manifold
Rear Height	6.625 inch
RPM Power Band	1800-6400
Style	EFI
Throttle Bore	92mm
Vacuum Ports	1/8" and (1) 1/4" Pipe

Holley 820112 Black Low Profile Sniper EFI Sheet Metal Fabricated Intake Manifold, LS1/2/6 w/ 102mm TB Opening & Fuel Rail Kit

$776.95

Hi-Ram Sheet Metal Fabricated Intake Manifold LS1/LS2/LS6 92mm Throttle Body opening + Fuel Rail Kit Silver with Sniper logo -Low Profile

*** This intake is designed to work with stock LS heads. The use of some aftermarket cylinder heads may result in port misalignment ***

Holley Sniper Fabricated Manifolds continues to push the aftermarket by introducing Low Profile intakes for GM LS Engines. These Intakes are a good looking, perform well, and offer an extremely good value for a performance sheet metal style intake manifold for the very popular GM LS engine family. Each manifold is ready to bolt on out of the box and are designed to accept our Sniper high-flow throttle bodies and include high flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured and welded for a perfect fit and maximum structural integrity. Choice of Throttle Body opening sizes of 92mm & 102mm are available

FEATURES:

Low Profile Design (overall 1.875” shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum
Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner.
3mm (1/8") thick T6061 Sheet Aluminum construction, strong and durable even under high horsepower and boosted conditions
Available in 92mm and 102mm bore Throttle Body Openings
100% TIG welded
Intakes include 3/8" Fuel rail kits with -8AN fittings and crossover braided line capable of supporting 750+ horsepower (laser engraved Sniper logo)
Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders

Brand	Holley Sniper EFI
Construction	Fabricated
Emission Code	3
Engine	GM LS1/LS2/LS6
Finish	Bead Blast Silver Anodized
Front Height	7.000 inch
Product Type	Intake Manifold
Rear Height	6.625 inch
RPM Power Band	1800-6400
Style	EFI
Throttle Bore	92mm
Vacuum Ports	1/8" and (1) 1/4" Pipe