K&N 63-3078 AirCharger Air Intake - 2011-2015 Chevy Camaro
The K&N AirCharger 63-3078 air intake system replaces the restrictive factory air filter and air intake housing in select Chevrolet Camaro models. K&N air intakes are designed to dramatically reduce air intake restriction as they smooth and straighten air flow. This allows your Camaro’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-3078 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the same area as the previously removed air box, keeping the air filter away from the hot air in the engine. This allows cooler, denser air to be directed through a custom molded air intake tube into the engine’s throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver, socket set and some wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
Nick Williams Performance drive-by-wire throttle bodies are CNC precision-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX performance engines. The 102mm throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed—no need to disassemble your factory throttle body.
LSx Surge Intake
Our unique design based on Holley's proven HiRam manifold provides unmatched power and torque production for a manifold in this compact of a package. Designed specifically for boosted engines the dual plenum intake excels in perfect air distribution across the engine. Insuring that each cylinder is reaching it's full potential to maximize engine efficiency and output. Measuring just under 9-7/8" from the valley flange of the block this provides an additional 3" of hood clearance versus the standard Hi-Ram configuration.
Item is custom order and is made per order
Texas Speed 108mm Electric Throttle Body
Texas Speed's new 108mm electric throttle body! Designed to work for any LS that uses an electric throttle body (harness adapter may be required) from the factory and designed to fit 108mm intake manifolds or bigger, using the standard 4-bolt flange. Offers great all around performance and improved driveability over other 108mm electric throttle bodies!
Texas Speed 105mm Electric Throttle Body
Texas Speed's new 105mm electric throttle body! Designed to work for any LS that uses an electric throttle body (harness adapter may be required) from the factory and designed to fit 105mm intake manifolds or bigger, using the standard 4-bolt flange. Offers great all around performance and improved driveability over other 105mm electric throttle bodies!
Texas Speed 102mm Electric Throttle Body
Texas Speed's new 102mm electric throttle body! Designed to work for any LS that uses an electric throttle body (harness adapter may be required) from the factory and designed to fit 102mm intake manifolds or bigger, using the standard 4-bolt flange. Offers great all around performance and improved driveability over other 102mm electric throttle bodies!
*Note: For Optional Color, Torque Rush Module(Needed for '03 to early-'07 trucks), Throttle Body Adapter Harness please call.
The power-enhancing technology ofSLP's BLACKWING COLD-AIR INDUCTION SYSTEMSwere pioneered many years ago onSLP'sthird and fourth generation F-car based Camaro's and is available for the 2010-11 V8 Camaro.
This new Blackwing system was designed from the ground-up to maximize air-flow, lower intake air temperatures and produce substantial horsepower and torque gains by incorporating many design features not found in typical cold-air kits.
AllSLPBlackwing systems are designed in 3D CAD (Computer Aided Design), enablingSLPto run CFD (Computational Fluid Dynamic) analysis optimizing the design. Once established in CAD, we flow bench, dyno and road test prior to releasing the final cold air system.
Each induction system includes a high-flow OEM quality, black-finished polypropylene upper intake tube with a raisedSLPBlackwing logo, an integrated MAF housing tube, and a new lower intake tube. This connects to a new high-flow reusableSLPBlackwing air-filter replacing the restrictive, power robbing factory assembly. This setup increases the flow rate of air providing up to a 15 horsepower gain. Includes a uniqueSLPwasher fluid reservoir which holds just under a gallon of fluid. All necessary hardware and detailed installation instructions included.
NOTE:Part number 25017 filter cleaning kit required when cleaning/re-oiling your filter.