C5 Corvette Cams

3 products

Sort

TSP 228/232 .600"/.600" Camshaft

$389.99

TSP LS1/LS2 Stage 3 Turbo Cam 228/234 .620/.600 115+3 LSA

$389.99

TSP 224/228 .600"/.600" Camshaft

$389.99

TSP 228/232 .600"/.600" Camshaft

$389.99

The 228/232 camshafts use lobes that are designed to be both beehive & double valve spring friendly.

The 228/232 camshaft is available in a wide variety of lobe separations. The most popular options customers select is either the 112 LSA or the wider 114 LSA. The 112 LSA helps to bring the camshafts powerband lower in the rpm band. The lower LSA also creates a slightly rougher idle.

The 228/232 camshaft is a very popular camshaft for customers wanting a very streetable camshaft that makes approximately 5-7 more horsepower than the 228R camshaft. Dyno testing has shown the 228/232 camshaft to make a solid 50-55 RWHP gains with all other supporting bolt-on modifications in place. The 228/232 camshaft is large enough that we recommend a minimum 2,800 RPM stall converter in automatic cars. Tuning will also be required in both automatic & manual applications.

TSP 228/232 , texas speed and performance,TSP camshaft , TSP tuning - Mail Order Tune

Ups shipping ,PCM of NC . RPM transmissions

TSP LS1/LS2 Stage 3 Turbo Cam 228/234 .620/.600 115+3 LSA

$389.99

TSP LS1/LS2 Stage 3 Turbo Cam Specs: 228/234 .620/.600 115+3 LSA

The TSP Stage 3 Turbo Cam is intended for 4,8, 5.3, 5.7, and 6.0 using single or twin-turbos. This camshaft will work in stock turbo’d applications or a wild built forged motor! Our Stage 3 Turbo cam will be sure to get every ounce of power possible out of your boosted setup. Our TSP double valve springs are recommended for this cam and turbo applications for extra reliability and safety, as well as our chromoly hardened pushrods.

Engines best suited for: 4.8, 5.3, 5.7, 6.0'

Desired Compression ratio for cam: 9.5:1 – 10:.5:1

Recommended Springs Required: Pac 1219 or TSP .660 Double Valve Spring

Aftermarket Stall Converter Required: Yes, 2800+

Upgraded Rear Gear Required: No, but Automatics should be at least a 3.23

Operating RPM Range: 2000-6600

Estimated Power Increase: 50+

Drivability: Will drive like stock but with some decent lope at idle.

For more information and help regarding camshaft selection, give us a call at 512-863-0900 and speak with one of our knowledgeable sales reps to discuss your camshaft needs!

TSP LS1/LS2 Stage 3 Turbo Cam 228/234 .620/.600 115+3 LSA - MailOrder Tuner

TSP 224/228 .600"/.600" Camshaft

$389.99

The 224/228 camshafts use lobes that are designed to be both beehive & double valve spring friendly.

The 224/228 camshaft is available in a wide variety of lobe separations. The most popular options customers select is either the 112LSA or the wider 114LSA. The 112LSA helps to bring the camshafts powerband lower in the rpm band. The lower LSA also creates a slightly rougher idle. Boost applications typically stay at 114LSA or wider with this camshaft.

The 224/228 camshaft is a popular option for guys wanting more exhaust duration in combination with the 224 intake lobe. This camshaft is very popular for guys running very streetable boost engines. It has awesome drivability while making a solid 40+ rear wheel horsepower gains in N/A applications & even more in boost applications!