- 427
- 5 gen
- 5.3 truck
- 5.7
- 6 GEN
- 6th gen
- c5
- c6
- C6 Corvette Intakes
- C7
- cam install kit
- Cam Packages
- camaro
- Camaro 5 Tune
- Camaro 6.2L tune
- Camaro DOD delete
- Camaro Email tune
- camaro exhaust
- camaro gen 5
- camaro ls1
- Camaro ls3
- camaro ls6
- camaro lt1
- Camaro LT1 tune
- Camaro LT1 Tuning
- Camaro LT4
- Camaro Remote tune
- Camaro tuner
- Camaro vvt tuning
- Camaro Z28 tune
- Camaro5 tune
- Camaro6 tune
- Camaro6 tuner
- camshaft
- corvette c6
- corvette ls3
- Corvette LS3 tune
- Corvette tune
- Corvette tuner
- DOD Delete Kits
- Email tunes
- Exhaust
- F body Email tune
- F body MailOrderTune
- F body tune
- F body tuner
- fbody
- Gen 5 Camaro Intakes
- gto
- GTO LS2 tune
- GTO Remote tune
- GTo remote tuning
- gto tune
- GTO Tuner
- hptuner
- hptuners
- HPTUNERS CUSTOM TUNE
- HPTUNERS KIT
- Hptuners MPVI
- hptuners pro
- Intake
- L83 DOD delete
- L83 Oil consumption
- L83 tuner
- L83 tuning
- L99 tuner
- ls1
- LS1 5.7
- ls1 camshaft
- ls1 Email tune
- ls2
- ls2 camshaft
- ls2 corvette
- ls2 gto
- LS2 tuner
- LS3 Email tune
- LS3 gto tune
- ls3 GTO tuner
- ls6 tune
- ls6 tuner
- ls6 tuning
- LS7
- LSX
- LSX tune
- LSX tuner
- lsx tuning
- LT 5.3L tune
- LT1
- LTX
- mail order tune
- MailOrderTune
- MailOrdertuner
- MPVI Pro
- MPVI2
- MPVI2 Pro
- oil consumption
- PRC
- Remote tune
- Remote tuner
- Remote tuning
- silverado 5.3
- stage 1
- stage 2
- stage 3 camshaft
- stage 4 camshaft
- texas speed
- Texas speed tune
- Texas Speed tuner
- trans
- truck cam
- truck camshaft
- VVT camshaft
- vvt tuning
- Z28
- Z28 tune
- 427
- 5 gen
- 5.3 truck
- 5.7
- 6 GEN
- 6th gen
- c5
- c6
- C6 Corvette Intakes
- C7
- cam install kit
- Cam Packages
- camaro
- Camaro 5 Tune
- Camaro 6.2L tune
- Camaro DOD delete
- Camaro Email tune
- camaro exhaust
- camaro gen 5
- camaro ls1
- Camaro ls3
- camaro ls6
- camaro lt1
- Camaro LT1 tune
- Camaro LT1 Tuning
- Camaro LT4
- Camaro Remote tune
- Camaro tuner
- Camaro vvt tuning
- Camaro Z28 tune
- Camaro5 tune
- Camaro6 tune
- Camaro6 tuner
- camshaft
- corvette c6
- corvette ls3
- Corvette LS3 tune
- Corvette tune
- Corvette tuner
- DOD Delete Kits
- Email tunes
- Exhaust
- F body Email tune
- F body MailOrderTune
- F body tune
- F body tuner
- fbody
- Gen 5 Camaro Intakes
- gto
- GTO LS2 tune
- GTO Remote tune
- GTo remote tuning
- gto tune
- GTO Tuner
- hptuner
- hptuners
- HPTUNERS CUSTOM TUNE
- HPTUNERS KIT
- Hptuners MPVI
- hptuners pro
- Intake
- L83 DOD delete
- L83 Oil consumption
- L83 tuner
- L83 tuning
- L99 tuner
- ls1
- LS1 5.7
- ls1 camshaft
- ls1 Email tune
- ls2
- ls2 camshaft
- ls2 corvette
- ls2 gto
- LS2 tuner
- LS3 Email tune
- LS3 gto tune
- ls3 GTO tuner
- ls6 tune
- ls6 tuner
- ls6 tuning
- LS7
- LSX
- LSX tune
- LSX tuner
- lsx tuning
- LT 5.3L tune
- LT1
- LTX
- mail order tune
- MailOrderTune
- MailOrdertuner
- MPVI Pro
- MPVI2
- MPVI2 Pro
- oil consumption
- PRC
- Remote tune
- Remote tuner
- Remote tuning
- silverado 5.3
- stage 1
- stage 2
- stage 3 camshaft
- stage 4 camshaft
- texas speed
- Texas speed tune
- Texas Speed tuner
- trans
- truck cam
- truck camshaft
- VVT camshaft
- vvt tuning
- Z28
- Z28 tune
AirAid 862-042 Corvette Dry Filter - Black Oil-Free
Regular price $229.99 Save $-229.99[More Information on AIRAID Direct-Fit Replacement Filters]
- Stock replacement filter for better performance
- Great filtration with low restriction
- Washable and reusable
- Simply takes only a few minutes to install
Available Information
Holley GM Gen V LT1 Hi-Ram, 1 x 92mm LS Throttle Body, WITHOUT Port EFI Provisions & Fuel Rails
Regular price $941.95 Save $-941.95FEATURES:
- Modular Design w/ Removable Top
- Overall Height: 13.34” (w/ EFI Top - 95mm or 105mm) – See Drawing
- A-B Height: 12.10” (w/ Carb Style Top - 2 x 4150 or 2 x 4500) – See Drawing
- Height at Plenum Flange: 9.44”
- Port Size: 2.06” High x 1.53” Wide
- Runner Length: Approx. 6.5”
- Large Plenum Volume of 549 Cubic Inches (w/ 1 x 95mm or 1 x 105mm Throttle Body Top)
- Available With or Without Injector Ports in the Runners
- Intakes w/ Injector Ports Include Fuel Rails w/ Dual Mounting (1.48” or 2.56” O-ring to O-ring injector length)
- Fuel Rails are Anodized, Laser Etched, and Machined for 8AN O-Ring Fittings at Each End
- Rear of Plenum Machined for MAP & 3 Vacuum Ports
- Head Flange has Clearance for Fuel Supply to High Pressure Pump
- Increased Runner Wall Thickness for Custom Porting at the Plenum to Runner Entry on Each Runner
- O-Ring Seals at Cylinder Heads & Plenum Top
- Easy Assembly w/ Top Mounted Screws on Plenum Top (all except front 2 screws)
- Several Top Options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or Blank Flange for Custom Throttle Bodies
- 3500-8000+ RPM Power Band
This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
Racing Vehicles are vehicles that are used exclusively for racing or other forms of competition that are not registered and that may never be used on the street.
Holley EFI 105mm Hi-Ram Modular Intake Manifold Kit, GM Gen 5 LT1, w/ EFI Provisions & Fuel Rails
Regular price $1,148.95 Save $-1,148.95The new Holley EFI Hi-Ram intake provides the ultimate performance with the new GM direct injected Gen V 6.2L LT1 engine. The modular design of this manifold allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper & cross-sectional area to perform in a wide variety of engine configurations. The optional injector bosses on the intake runners allow increased performance potential by using additional injectors along with the factory direct injection. When you look for the pinnacle of performance, price, and quality, look to Holley EFI.
- Modular Design w/ Removable Top
- Overall Height: 13.34” (w/ EFI Top - 95mm or 105mm) – See Drawing
- A-B Height: 12.10” (w/ Carb Style Top - 2 x 4150 or 2 x 4500) – See Drawing
- Height at Plenum Flange: 9.44”
- Port Size: 2.06” High x 1.53” Wide
- Runner Length: Approx. 6.5”
- Large Plenum Volume of 549 Cubic Inches (w/ 1 x 95mm or 1 x 105mm Throttle Body Top)
- Available With or Without Injector Ports in the Runners
- Intakes w/ Injector Ports Include Fuel Rails w/ Dual Mounting (1.48” or 2.56” O-ring to O-ring injector length)
- Fuel Rails are Anodized, Laser Etched, and Machined for 8AN O-Ring Fittings at Each End
- Rear of Plenum Machined for MAP & 3 Vacuum Ports
- Head Flange has Clearance for Fuel Supply to High Pressure Pump
- Increased Runner Wall Thickness for Custom Porting at the Plenum to Runner Entry on Each Runner
- O-Ring Seals at Cylinder Heads & Plenum Top
- Easy Assembly w/ Top Mounted Screws on Plenum Top (all except front 2 screws)
- Several Top Options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or Blank Flange for Custom Throttle Bodies
- 3500-8000+ RPM Power Band
Holley GM Gen V LT1 Hi-Ram, 1 x 92mm LS Throttle Body w/ Port EFI Provisions & Fuel Rails
Regular price $1,086.95 Save $-1,086.95FEATURES:
- Modular Design w/ Removable Top
- Overall Height: 13.34” (w/ EFI Top - 95mm or 105mm) – See Drawing
- A-B Height: 12.10” (w/ Carb Style Top - 2 x 4150 or 2 x 4500) – See Drawing
- Height at Plenum Flange: 9.44”
- Port Size: 2.06” High x 1.53” Wide
- Runner Length: Approx. 6.5”
- Large Plenum Volume of 549 Cubic Inches (w/ 1 x 95mm or 1 x 105mm Throttle Body Top)
- Available With or Without Injector Ports in the Runners
- Intakes w/ Injector Ports Include Fuel Rails w/ Dual Mounting (1.48” or 2.56” O-ring to O-ring injector length)
- Fuel Rails are Anodized, Laser Etched, and Machined for 8AN O-Ring Fittings at Each End
- Rear of Plenum Machined for MAP & 3 Vacuum Ports
- Head Flange has Clearance for Fuel Supply to High Pressure Pump
- Increased Runner Wall Thickness for Custom Porting at the Plenum to Runner Entry on Each Runner
- O-Ring Seals at Cylinder Heads & Plenum Top
- Easy Assembly w/ Top Mounted Screws on Plenum Top (all except front 2 screws)
- Several Top Options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or Blank Flange for Custom Throttle Bodies
- 3500-8000+ RPM Power Band
This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
Racing Vehicles are vehicles that are used exclusively for racing or other forms of competition that are not registered and that may never be used on the street.