07-13 Truck/SUV Email Tune HP Tuners MPVI4 Bundle | MAILORDERTUNER

$800.00

Our email tune is the fastest, cheapest way to get tuned in a few easy steps:

Fill out our handy online form during checkout
Email your tuning file to mailordertuner@gmail.com
We’ll email your tuned file back to you ASAP, usually within 1-3 business days

Note: you must have your own tuner such as an MPVI4 to install your new tuning file.

- Credits Included

Want an email tune but need a tuner? Check out our handy bundles to get an MPVI4 with two tuning licenses along with your tuning file! Select overnight shipping for the fastest possible tune apart from a pure e-tune.

** THERE ARE NO REFUNDS AFTER THE SALE ON DIGITAL FILES - Once a file is sent you own it ******

07-13 Truck/SUV Email Tune, HP Tuners MPVI2 Bundle also tunes for Texas Speed and Performance: the LS1-LS2-LS3 and LS7 platforms. Our primary tuning and scanning software is HPtuners, this allows us to modify the GM, ECM, and TCM. Holley EFI Certified, FItech, SCT, and Fast XFI certified, MailOrderTuner has options for Oil Consumption as well as DOD Delete packages.

07-13 Custom Truck Tuning Near Me, Ls1 Programmer, Ls Pcm Tuning Software, Computer Tuner, Custom Truck Tuning, Lsx Power Tuning, 0411 Pcm Tuning, Tsp 233 239, C5 Corvette Cam Swap, Hp Tuners Ls Swap, Hp Tuners 5.3 Tune, Tuning Software For Ls Motors, Hp Tuners Idle Tuning

07-13 Truck/SUV Email Tune HP Tuners MPVI4 Bundle | MAILORDERTUNER - MailOrder Tuner

24" O2 Extension - INDIVIDUAL

$20.00

Sold individually! 2 Required per vehicle!

24" O2 Extension for 1997-2003 Corvette and 1993-1997 LT1 F-bodies.

24" O2 Extension - INDIVIDUAL - MailOrder Tuner

AirAid '14-'18 Corvette Intake Kit - Red Oiled Premium

$599.99

The AIRAID 250-274 fits some Chevrolet Corvette models. See vehicle applications for details.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Corvette models. This air intake starts with a replacement two-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates a heat shielded air intake tube as well as a built-in velocity stack, which further promotes airflow, and has provisions for the factory mass air sensor and PCV lines. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.

[More Information on AIRAID MXP Air Intake Systems]

Red oiled premium air filter recommended for dusty dry driving conditions
Superior horsepower and acceleration gains
Replaces stock intake tubing, air filter and air box
Easy to install using commonly available tools
High airflow washable and reusable air filter media
MXP air box incorporates a window for filter inspection
No Hassle Lifetime Warranty

Available Information

250-274 Cross Reference

Installation Instruction Sheet

Corvette Programmer, Corvette Pcm Tuning Software, Tuning Software For Ls Motors, Hp Tuners Idle Tuning Computer Tune

AirAid 2001-04 Corvette Intake Kit - Black Dry

$399.99

The AIRAID 252-292 fits some Chevrolet Corvette, and Chevrolet Corvette Z06 models. See vehicle applications for details.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Corvette models. This air intake starts with an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system has provisions for the factory mass air sensor, inlet air temperature sensor and crankcase vent tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.

[More Information on AIRAID MXP Air Intake Systems]

Black dry synthetic premium air filter
Superior horsepower and acceleration gains
Replaces stock intake tubing and air filter
Easy to install using commonly available tools
High airflow washable and reusable air filter media
No Hassle Lifetime Warranty

Available Information

Installation Instruction Sheet

AirAid 2001-04 Corvette Intake Kit - Black Dry - MailOrder Tuner

AirAid 2001-04 Corvette Intake Kit - Red Oiled

$399.99

The AIRAID 250-292 fits some Chevrolet Corvette, and Chevrolet Corvette Z06 models. See vehicle applications for details.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Corvette models. This air intake starts with an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system has provisions for the factory mass air sensor, inlet air temperature sensor and crankcase vent tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.

[More Information on AIRAID MXP Air Intake Systems]

Red oiled premium air filter
Superior horsepower and acceleration gains
Replaces stock intake tubing and air filter
Easy to install using commonly available tools
High airflow washable and reusable air filter media
No Hassle Lifetime Warranty

AirAid 2001-04 Corvette Intake Kit - Red Oiled - MailOrder Tuner

AirAid 2010-15 Camaro Intake Kit - Black Dry

$449.99

The AIRAID 252-305 fits some Chevrolet Camaro SS models. See vehicle applications for details.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Camaro SS models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates fresh air ducting, which further promotes airflow, and has provisions for the factory mass air sensor and crankcase vent tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.

[More Information on AIRAID MXP Air Intake Systems]

Black dry synthetic premium air filter
Superior horsepower and acceleration gains
Replaces stock intake tubing, air filter and air box
Easy to install using commonly available tools
High airflow washable and reusable air filter media
No Hassle Lifetime Warranty
Air filter is protected from the engine compartment hot air

Available Information

Installation Instruction Sheet

AirAid 2010-15 Camaro Intake Kit - Black Dry - MailOrder Tuner

AirAid 2010-15 Camaro Intake Kit - Red Oiled

$449.99

The AIRAID 250-305 fits some Chevrolet Camaro SS models. See vehicle applications for details.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Camaro SS models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system incorporates fresh air ducting, which further promotes airflow, and has provisions for the factory mass air sensor and crankcase vent tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.

[More Information on AIRAID MXP Air Intake Systems]

Red oiled premium air filter
Superior horsepower and acceleration gains
Replaces stock intake tubing, air filter and air box
Easy to install using commonly available tools
High airflow washable and reusable air filter media
No Hassle Lifetime Warranty
Air filter is protected from the engine compartment hot air

Available Information

Installation Instruction Sheet

AirAid 2010-15 Camaro Intake Kit - Red Oiled - MailOrder Tuner

AirAid 2016-18 Camaro Carbon Fiber Intake Kit - Red Oiled

$799.99

The AIRAID 250-333C fits some Chevrolet Camaro SS models. See vehicle applications for details.

The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Camaro SS models. This air intake starts with a replacement one-piece roto-molded air box featuring a carbon fiber lid that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new carbon fiber air intake tube that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Additionally, this MXP air intake system has a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.

[More Information on AIRAID MXP Air Intake Systems]

Superior horsepower and acceleration gains
High airflow washable and reusable air filter media
Carbon Fiber Air Intake Tube
MXP air box incorporates a carbon fiber lid that shields the air filter from hot engine air and provides easy serviceability of the air filter
Tuned velocity stack for high air flow and mass air sensor functionality
Replaces stock intake tubing, air filter and air box
No Hassle Lifetime Warranty
Red oiled premium air filter recommended for dusty dry driving conditions

Available Information

Installation Instruction Sheet

AirAid 2016-18 Camaro Carbon Fiber Intake Kit - Red Oiled - MailOrder Tuner

AirAid 862-042 Corvette Dry Filter - Black Oil-Free

$229.99

The AIRAID 862-042 fits some Chevrolet Corvette, and Chevrolet Corvette Z06 models. See vehicle applications for details.

This AIRAID Direct-Fit Replacement Filter is a drop-in replacement for your vehicle’s stock paper air filter that is designed to improve horsepower and acceleration. The air filter is constructed with multiple layers of filter media and provides significant improvements in air flow and filtration compared to typical replacement filters with the added benefit of being washable and reusable. Why throw money away on a paper filter each time the old one gets dirty when you can upgrade to a serviceable AIRAID Direct-Fit Replacement Filter for often less than the cost of two stock replacements? Installation takes only minutes and is as simple as replacing your stock filter.

[More Information on AIRAID Direct-Fit Replacement Filters]

Stock replacement filter for better performance
Great filtration with low restriction
Washable and reusable
Simply takes only a few minutes to install

Available Information

Installation Instruction Sheet

AirAid 862-042 Corvette Dry Filter - Black Oil-Free - MailOrder Tuner

AirAid Jr 2010-15 Camaro Intake Kit - Red Oiled Direct Fit

$249.99

The AIRAID 250-714 fits some Chevrolet Camaro SS models. See vehicle applications for details.

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake kit offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

[More Information on AIRAID Jr. Kits]

Oiled Direct-Fit Replacement Filter
Helps boost horsepower and acceleration
Replaces stock air filter and intake tubing retaining stock air box
High airflow premium air filter
Low restriction polyethylene intake tube
Easy to install with little mechanical knowledge
Washable and reusable air filter media
No Hassle Lifetime Warranty

Available Information

Installation Instruction Sheet

AirAid Jr 2010-15 Camaro Intake Kit - Red Oiled Direct Fit - MailOrder Tuner

AirAid Jr 2016-2018 Camaro Intake Kit - Red Oilied Direct Fit

$229.99

The AIRAID 250-701 fits some Chevrolet Camaro SS models. See vehicle applications for details.

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake kit offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

[More Information on AIRAID Jr. Kits]

Oiled Direct-Fit Replacement Filter
Helps boost horsepower and acceleration
Replaces stock air filter and intake tubing retaining stock air box
High airflow premium air filter
Low restriction polyethylene intake tube
Easy to install with little mechanical knowledge
Washable and reusable air filter media
No Hassle Lifetime Warranty

Available Information

Installation Instruction Sheet

Lt1 Programmer, Ls1 Pcm Tuning SoftwareHp Tuners Idle Tuning

ARP 6.2L LT1 Head Stud Kit Without Corner Bolts

$444.02

ARP high performance cylinder head stud kits are precision centerless-ground and thread-rolled to Mil-S-8879 specs. Their black oxide finish protects them from wear and corrosion, and ARP throws in hardened parallel washers for uniform load distribution and accurate torque readings. Keep your cylinders mounted securely.

ARP Head Stud Kit (46-234-4342) - MailOrder Tuner

ARP 8740 12-Point Head Stud Kit, 2004+ Blocks

$393.91

ARP head stud kits are available with your choice of conventional hex nuts or compact 12-point nuts. Premium quality parallel ground washers are also included with each kit. Clearly, they are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.

“On the basis of superior material, a special heat-treating process, and advanced manufacturing technology, ARP Pro Series head studs are clearly the very finest on the market today!”

ARP Head Studs #46-234-4317 - MailOrder Tuner

ARP Harmonic Balancer Bolt

$39.25

ARP Harmonic Balancer Bolt For Wet-Sump LS Based Vehicles! WILL NOT FIT DRY-SUMP LS ENGINES!!

ARP Harmonic Balancer Bolt 234-2503 - MailOrder Tuner

ARP Hex Head Bolt Kit, 2004+ Blocks

$151.31

ARP Hex Head Bolt Kit For LS2, L92, LS7, and mid-year 2004+ LSX-Based Engines.

ARP Hex Head Bolt Kit, 2004+ Blocks - MailOrder Tuner

ARP Wet Sump Bolt, Trucks /Non-Z51-Equipped Cars (46-234-2503)

$39.25

ARP Harmonic Balancer Bolt For LS1 Based Vehicles! WILL NOT FIT DRY-SUMP LS7 AND LS3 ENGINES!!

ARP Wet Sump Bolt, Trucks /Non-Z51-Equipped Cars (46-234-2503) - MailOrder Tuner

Boosted Tune Option

$400.00

This is an option on our Email Tunes.

DO NOT PURCHASE, you will be refunded. :)

Boosted Tune Option - Email

$400.00

This is an option on our Email Tunes.

DO NOT PURCHASE, you will be refunded. :)

Camaro AirAid Jr 2010-15 Camaro Intake Kit - Red Oil-Free

$249.99

The AIRAID 251-714 fits some Chevrolet Camaro SS models. See vehicle applications for details.

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake system offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

[More Information on AIRAID Jr. Kits]

Easy to clean oil-free synthetic air filter
Helps boost horsepower and acceleration
Replaces stock air filter and intake tubing retaining stock air box
High airflow premium air filter
Low restriction polyethylene intake tube
Easy to install with little mechanical knowledge
Washable and reusable air filter media
No Hassle Lifetime Warranty

Available Information

Installation Instruction Sheet

Camaro AirAid Jr 2010-15 Camaro Intake Kit - Red Oil-Free - MailOrder Tuner

Cleetus McFarland "Bald Eagle" LS3 N/A Cam

$409.99

229/242 .600"/.600" 112 LSA 109 ICL

Purchase the LS3 naturally aspirated verison of the Bald Eagle camshaft made famous by Cleetus McFarland and "Leroy", his savage C5 Corvette! The naturally aspirated version of the Bald Eagle camshaft is a great choice for engines running LS3 rectangular port heads and not running a supercharger. It will have a little bit more chop at idle vs. the boosted version of the LS3 Bald Eagle cam. It comes with a large dose of 'murica and full of bald eagles! While we will not release the complete specs of the camshaft, we can tell you that the duration @ .050" is 229/242 for the intake and exhaust, respectively. It is an easy camshaft to tune and has a nice lope at idle. Automatic-equipped vehicles will require a minimum of a 2,800 RPM stall speed torque converter. This cam can easily be daily driven with zero issues once tuned properly. We recommend pairing the Bald Eagle cam with our TSP dual spring kit that includes PAC Racing polished dual valve springs, titanium retainers, spring seats, and valve seals.

*This cam will only come in a 3-bolt cam core. If your car came from the factory with a single-bolt core, we do offer the 3-bolt upper timing sprocket and ARP cam bolt kit that will allow you to install the 3-bolt camshaft into your engine. Cam also requires the removal of DOD/AFM and VVT, if installed from the factory.

Cleetus McFarland Camshaft , TSP camshaft , LS3 camshaft , Bald eagle cam - Mail Order tune

Comp Cams Dual Spring Kit w/ Tool Steel Retainers

$595.95

LS Engine Dual Valve Spring Kit: Tool Steel Retainers

GM LS
Dual Spring Kit
.660" Max Lift

Includes:

26925-16 Street/Strip Dual Springs • 1717-16 Lightweight Tool Steel Retainers • 623-16 7° Steel Valve Locks • 511-16 Valve Seals • 4705-16 Spring Seats

This Dual Valve Spring Kit for LS engines includes carefully matched Dual Valve Springs, tool steel retainers, locks, seals and spring seats. With a .660" maximum lift, these COMP Cams® Dual Valve Springs for race applications are manufactured from Super Clean™ wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams® Dual Valve Springs exceed the expectations of today’s engine builders and racers.

Comp Cams Dual Spring Kit w/ Tool Steel Retainers - MailOrder Tuner

Crank Bolt/Gasket Kit w/ ARP Bolt #28-CamGskKitARP

$45.00

New GM crank bolt, with gaskets, and arp cam bolts

Crank Bolt/Gasket Kit w/ ARP Bolt #28-CamGskKitARP - MailOrder Tuner

Crank Bolt/Gasket Kit w/ GM Bolt #28-CamGskKit

$39.00

The Basic Camshaft Bolt and Gasket kit comes with everything needed for your quick cam swap!

Kit includes the following items:

Timing Cover Gasket
Front Crankshaft Seal
Water Pump Gaskets
GM Harmonic Balancer Bolt

Crank Bolt/Gasket Kit w/ GM Bolt #28-CamGskKit - MailOrder Tuner

ECM mismatch

$100.00

Change VIN, style of ECM

FAST Big Mouth 102mm Throttle Body w/TPS Sensor

$319.99

When it comes to improving your engine’s performance, increased airflow is a key ingredient. The FAST™ Big Mouth Throttle Bodies™ for the FAST™ LSX™ 92mm & LSXR™ 102mm Intake Manifolds increase airflow through a series of innovative design changes and a slightly enlarged throttle opening. FAST™ also invested significant testing & engineering resources into optimizing cross-sectional flow and eliminating airflow turbulence, especially at part throttle operation.

In addition, these throttle bodies offer increased throttle blade thickness to eliminate deflection commonly found with other throttle bodies, especially those in boosted applications. A smoother operating offset blade pivot improves throttle response, and a beefed up linkage and dual throttle spring mechanism ensure total throttle control. The FAST™ Big Mouth 92mm Throttle Body™ will deliver bolton GM Gen III (LS1, -2 & -6) horsepower while the LSXR™ is designed to maximize potential performance upgrades on L92/LS3/LS7 engines.

FAST Big Mouth 102mm Throttle Body w/TPS Sensor - MailOrder Tuner

GM 3-Bolt 4x Upper Sprocket (28-12586481) & ARP Cam Bolts (46-134-1003)

$33.00

his GM cam gear is used in late model combos that are being swapped from the single-bolt cam to the older three-bolt cam design. You will also need ARP cam bolts, part number 46-134-1003! This gear mounts to the camshaft via 3 three bolts and has the 4X reluctor (4 raised portions for cam position sensor to read).

ARP Camshaft Bolt Kit for LS1, LS2, L92, LS7 Engines.

These high-quality ARP cam bolts have increased preload clamping force to ensure positive timing gear register. Their increased material strength overcomes valvetrain harmonics and stress. These cam bolts have a reduced head size that makes installation and removal easier. They are available in 170,000 psi high-performance kits, and 190,000 psi Pro series kits.

GM 3-Bolt 4x Upper Sprocket (28-12586481) & ARP Cam Bolts (46-134-1003) - MailOrder Tuner

GM 6.2L Multi-Layer Steel LS9 (7Layer) Cylinder Head Gasket. (Sold individually)

$61.99

These GM Performance head gaskets feature stainless steel faces.

BORE SIZE: 4.10"

THICKNESS: .054" Compressed

GM MLS LS9 #28-12622033 - MailOrder Tuner

GM Dry Sump Bolt, Z51-Equipped Cars (28-11570163)

$16.99

the GM LS7 Harmonic Balancer Bolt is specifically designed for the longer snout on GM LS7 dry-sump crankshafts!

GM Dry Sump Bolt, Z51-Equipped Cars (28-11570163) - MailOrder Tuner

GM Gen 5 6.2L LT4 Head Gasket, Per Gasket

$91.99

Factory GM Gen 5 6.2L LT4 Supercharged Head Gasket

GASKETS ARE SOLD INDIVIDUALLY!