Products

Texas Speed & Performance is proud to announce the arrival of the all new TSP 2010 Camaro SS 304 stainless steel 1-7/8" or 2" long tube headers. This system features all stainless steel tubing to provide our customers with the best possible products at pricing that cannot be beat! Why pay competitors $1,100 or more for a set of headers? The TSP long tube headers are fully mandrel-bent on CNC mandrel benders for the best possible flow and accuracy possible! Headers are available with off-road or catted Mid-Section.

Features:

• 1-7/8" 304 Stainless Steel (Select Drop-Down)
• 2.0 mm thick tubing (much thicker than competitors' headers)
• 3" merge-style collector w/ welded O2 bung
• Includes new GM gaskets and exhaust clamps
• Now Includes O2 Extensions as Standard
• Catted Connection Pipes
• Velocity spike for improved power and torque

• Stainless Steel Tubing
• Stainless Band Clamps
• 3" Mandrel Bent Exhaust Tubing
• 1-7/8" Header Primaries
• 3" TSP Mufflers
• Plug & Play O2 Extensions
• Exhaust Gaskets
• Catted Long Tube Header System
• Axle-Back Exhaust

*Due to the weight and size of the system, our website is not able to accurately calculate shipping costs. Please give us a call for an accurate shipping quote. This system will ship in a total of three boxes.

*Custom tuning will be required to turn off the rear O2 sensors. The system does not have fittings for the rear O2 sensors since the PCM will still throw a "service engine soon" light with the cats moved so much further back vs. the factory location.

*Remove the lower brace for proper fit.

*Additional Modifications Required for Convertibles

*Does not fit Camaro ZL1

Racing Use Only, Not Legal for Road Use

Texas Speed & Performance is proud to introduce our 1-7/8" long tube headers and y-pipe package to our exhaust line-up for the 2014+ Chevrolet and GMC 5.3L vehicles. These headers are built of quality 304 stainless steel with full mandrel bends for long-term durability and maximum flow. Our full long tube design allows for excellent horsepower and torque gains throughout the RPM band! It is a must for those looking to wake up their direct injection GM truck, whether it be for more pulling power or reduced 1/4-mile ET's. They are paired up to your choice of our 3-inch 304 stainless steel off-road or catted y-pipe with high-flow catalytic converters.

 Texas Speed 3" High Flow Y-Pipe For Texas Speed Headers

Texas Speed 3" Catted Y-Pipe Now Comes Standard in Stainless Steel!

• 3" Mandrel Bends
• Stainless Steel Tubing
• (6) 3" Clamps, Including 2 band clamps for a better seal between collector and y-pipe
• High Flow Bullet-Style Cats

TSP 6.2L LT1 "EL-C7" V2 Camshaft

231/245, .645"/.631", 112 LSA, 109 ICL w/ +32% Fuel Lobe

The Texas Speed & Performance LT1 "El-C7" V2 camshaft is a great choice for the enthusiast looking for a  maximum effort camshaft for their gen 5 LT1. It will have a gnarly lope at idle and will require a higher stall speed torque converter for automatics. It does not retain the factory AFM/DOD functionality that deactivates cylinders, so a DOD/AFM delete kit will be needed. We recommend that the VVT be locked out by means of a phaser lockout kit for all of our TSP LT camshafts.

All LT V2 camshafts will come standard with our +32% fuel lobe. The +32% fuel lobe will require the use of a lash cap, so please make sure that you install one during the camshaft installation! (Do not use lash cap with LT4 fuel pump) 

• Engines best suited for: LT1 6.2L

• Desired Compression ratio for cam: Stock

• Recommended Springs Required: Manton conical valve springs or TSP dual .660 spring kit

• Aftermarket Stall Converter Required: 3200+ RPM stall recommended

• Upgraded Rear Gear Required: No

• Operating RPM Range: 3000-7000

• Power Increase: 107hp and 11ft/lbs (Gains) 598HP/516TQ (Total)

• Drivability: Not recommended for a daily driver but it can be done with adequate tuning. More of a weekend warrior street/strip cam.
• Phaser Lockout Required: Yes

TSP 6.2L LT1 "EL-C7" V2 Camshaft

Stage 3 LT1 Cam

231/245, .645"/.631", 112 LSA, 109 ICL w/ +32% Fuel Lobe

The Texas Speed & Performance LT1 "El-C7" V2 camshaft is a great choice for the enthusiast looking for a  maximum effort camshaft for their gen 5 LT1. It will have a gnarly lope at idle and will require a higher stall speed torque converter for automatics. It does not retain the factory AFM/DOD functionality that deactivates cylinders, so a DOD/AFM delete kit will be needed. We recommend that the VVT be locked out by means of a phaser lockout kit for all of our TSP LT camshafts.

All LT V2 camshafts will come standard with our +32% fuel lobe. The +32% fuel lobe will require the use of a lash cap, so please make sure that you install one during the camshaft installation! (Do not use lash cap with LT4 fuel pump) 

• Engines best suited for: LT1 6.2L

• Desired Compression ratio for cam: Stock

• Recommended Springs Required: Manton conical valve springs or TSP dual .660 spring kit

• Aftermarket Stall Converter Required: 3200+ RPM stall recommended

• Upgraded Rear Gear Required: No

• Operating RPM Range: 3000-7000

• Power Increase: 107hp and 11ft/lbs (Gains) 598HP/516TQ (Total)

• Drivability: Not recommended for a daily driver but it can be done with adequate tuning. More of a weekend warrior street/strip cam.
• Phaser Lockout Required: Yes

The gen 5 LT1 engine utilizes Variable Valve Timing (VVT) controlled via a cam phaser. A cam phaser is a computer-controlled cam gear that automatically optimizes camshaft timing based on the current engine RPM. While this technology provides tremendous efficiency benefits, it presents a challenge when designing performance cams due to the wide range of valve timing movement and constantly changing piston-to-valve clearance. With the help of Texas Speed's Superflow 902 engine dyno, we are able to custom-design camshafts and phaser tuning tables to allow our gen 5 LT1 customers the ability to purchase the ultimate in LT1 performance camshafts! Thanks to the Superflow 902 dyno, Texas Speed is the only company that currently offers a VVT camshaft with a phaser table included to properly tune the camshaft phaser once it's installed in your 2014+ Corvette!

The Texas Speed & Performance LT1 VVT-3 camshaft is a great choice for the enthusiast looking for maximum horsepower from their gen 5 LT1. It will have a lope at idle and will require a higher stall speed torque converter for automatics. It does not retain the factory AFM/DOD functionality that deactivates cylinders, so a DOD/AFM delete kit will be needed. It does however retain the variable valve timing (VVT) system that allows the engine to advance and retard the cam while the engine is running, so a phaser limiter kit will also be needed. This provides a much better power curve since the engine can advance the cam in the lower RPM's for better torque and retard the cam in the upper RPM's for better horsepower. VVT can also be locked out by means of a phaser lockout kit. We do recommend using our TSP .660" dual spring kit with PAC springs & titanium retainers and TSP hardened chromoly pushrods with this camshaft.

Each gen 5 LT1 camshaft Texas Speed offers will require the use of a phaser limiter kit. The phaser limiter restricts the range of cam timing movement. This modification provides the necessary valve clearance for serious performance camshafts with tighter lobe separations while still utilizing the benefits of the VVT technology.

This camshaft will come standard with our +32% fuel lobe.

All of our TSP LT1 camshafts were designed on our SuperFlow 902 engine dyno using an otherwise stock 6.2L LT1 engine. We design and test many different camshafts before selecting the camshafts that we offer to our customers. This provides us with a distinct advantage of offering the best power curve possible without sacrificing overall performance, as well as knowing that what we offer is also safe and will not have any piston-to-valve clearance issues. We test our products before we sell them, so you KNOW that you are purchasing a camshaft that is proven!